The static transfer switch (STS) is an electrical device that allows instantaneous transfer of power sources to the load. This superior switching time means that if one power source fails the STS switches to the back-up power source so quickly that the load never recognizes the transfer made. Fast-acting STS are increasingly . Powered by two independent power sources, the STS rapidly switches from one source to the other automatically when the power supply used to power its connected load fails. For datacenter applications the STS .

Благодаря непрерывному мониторингу источников обеспечивается автоматическое и мгновенное переключение с одноо источника на . Accessibility, Front, side and rear. Ensures instantaneous transfers without cross connection of sources via . Because there are no mechanical moving parts, the transfer can be completed rapidly, perhaps within a quarter-cycle of the power . MGE static transfer switches (STS) supply power to a range of equipment from two independent and redundant power sources. Even under extreme conditions, such as 1degrees out of . Static Transfer Switches automatically transfer power to a stable alternate source in less than 4ms under normal operating conditions.

Expert solutions for LV electrical networks: power control and safety, critical power, energy efficiency and solar power.

Rack-mount automatic transfer switches utilize a superfast solid state SCR driven static transfer switch STS technology for high speed as well as high reliability. Static transfer switches offer many benefits over automatic transfer switches, but they may still not be ideal for your data center. Forty years ago, Cyberex revolutionized power distribution with its invention of the static transfer switch. Since then, Cyberex has installed more units than any other manufacturer. STATIC TRANSFER SWITCHES.

In the ever-increasing requirement for resilient and redundant power supplies, the Piller APOTRANS unit represents the latest evolution of redundancy. The APOTRANS static transfer switch is suitable either as a retrofit to existing power distribution systems or for . This STS automatically transfers critical loads from a primary power source to an alternate power source in the event of interruption or abnormal conditions. Designed using Silicon-Controlled Rectifier ( SCR) . In automotive components assembly line in Detroit, a customer service operation in Florida, an RD lab in Baltimore, telecommunications and E-commerce firms, manufacturers, office buildings, industrial parks – all stand to be crippled at any. Abstract: Many industrial loads suffer from various power quality problems like voltage sag and swell, service outages etc.

Due to these power quality issues industrial customer bears huge financial loss. So in this situation static transfer switch can be the most cost effective solution to avoid from these problems. PDI is an industry leading USA based manufacturer of mission critical static transfer switches.

This unit monitors two input sources continuously, out of which one source will normally feed the critical loads. In case of failure of this input source, the STS will automatically transfer the critical loads to the other .

The Eaton Type II STS transfers electrical loads from one source to another while eliminating the chance of a loss of power to critical equipment by properly coordinating with the electrical distribution system. During a fault condition, the Type II . Find all the manufacturers of static transfer switch and contact them directly on DirectIndustry.