We bought a kit from dealextream 37-in-sensor kit but found out that the documentation was very poor. To improve that we made our own documentation of the kit. Passive buzzer keyes arduino ile ilgili görseller keyes arduino için diğer resimler Görseller hakkında kötüye kullanım bildirin Geribildirim için teşekkür ederiz. Başka bir görseli rapor et Lütfen rahatsız edici görseli rapor edin. Buy on Dealextreem sensor or kit.

Hall magnetic sensor module.

The KY-0is a magnetic switch. If no magnetic field is present, the signal line of the sensor is HIGH ( V). If a magnetic field is presented to the sensor, the signal line goes LOW, at the same time the LED on the sensor lights up. I thought that it could be useful to compile a list of the little Keyes boards and to link them to blogs on this site, wherever possible. Vibration Sensor, outputs a LOW when vibrated.

Temperature Sensor DS18B20. Shenzhen KEYES DIY Robot co. Cutedigi and a couple of other sites have some info but most are very light on detail.

It includes a functional description, pin outs, schematics and a tutorial.

In this Instructable I will be explaining the basics about all the individual sensors in the In Sensors Kit For. Visit the techydiy Amazon. The module has outputs: Analogue, which gives a real-time voltage output signal on thermal resistance, and digital which allows temperature thresholds to be set via a potentiometer. Operating Voltage: 5V . Product Specifications . Chances are your sensor does not look like the one I used. Regardless, if your sensor is analog the code should work for yours as well, although your setup will be different.

TYPES OF IR REMOTE CONTROLS Keyes -IR-1-300. Most handheld remotes are shipped with a small clear plastic piece in the battery compartment that must be removed to activate it. You can usually just pull it out.

There are many different IR remote controls. My Bluetooth Remote Control Robot kit also comes with a Keyes Infrared remote sensor and a command. To install, just follow the instructions provided in the README file. The module can be mounted using the 3mm holes for easy permanent installation.

Power should be 3V – 5. Buy the latest keyes arduino GearBest.