HC – module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. Serial port Bluetooth module is fully qualified Bluetooth V2. EDR (Enhanced Data Rate) 3Mbps. Modulation with complete 2. The naming rule of HC-is same. When HC-and HC – are out of factory, one part of parameters are set for activating the device.

The work mode is not set, since user can set the mode of HC-0 HC – as they want. In the last chapter, the command set. BLUETOOTH TO SERIAL PORT. HC‐ module is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. Its communication is via serial communication which makes an easy way to interface with controller or PC.

HC – Bluetooth module provides switching mode between master . Download as PDF File (.pdf), Text File (.txt) or read online. HC – embedded Bluetooth serial communication module (can be short for module) has two work modes: order-response work mode and automatic connection work mode. And there are three work roles (Master, Slave and Loopback) at the automatic connection work mode. When the module is at the automatic connection. If the default configuration suits your application, then you can use EGBT-045MS immediately.

Once it is paired to a master Bluetooth device, its opera- tion becomes transparent to the user. No user code specific to the Bluetooth module is needed at all in the user microcontroller program. The zs-0breakout boards are now being used for many different modules and you may not have the exact same boards as those shown below.

You can find the full manual below. UPDATED july 7: I had the opportunity to test a HCmodule. This guide now covers HC-module too. Studuino_setup_software. Having multiple bluetooth modules with the same name can be confusing.

Guangzhou HC Information Technology Co. CHECKED BY : Eric Huang. JavaScript Robotics and IoT programming framework, developed at Bocoup. HC‐module is an easy to use Bluetooth SPP (Serial Port Protocol) module,designed for transparent wireless serial connection setup. Just go through the datasheet for more details File: Datasheet.

HC-and HC – (Source Wavesen Data Sheet ). RIGHT) (And some 3-D printed parts!) bluetooth- HC-E. This is a complex chip which uses an external Mbit flash memory. GHz BlueTooth Radio chip.

These low-cost Bluetooth Sub-modules work . Most HC – modules require a 5V operating voltage. V circuit (a simple voltage divider) at the Arduino TX pin is recommended. Edit this file using an external application .